Harris Nexio G8, Руководство по оборудованию, Страница: 41 / 76

39 Chapter 2 | Installation and Setup
G 8 H a r d w a r e I n s ta l l a t i o n M a n u a l
Copyright © 2014 Harris Broadcast
Proprietary and Confidential
Release the Inner Rail from the Outer Rails
1 Identify the left and right outer rail assemblies.
2 Pull the inner rail out of the outer rail until it is fully extended.
3 Press the locking tab down to release the inner rail.
Figure 2-11. Release Inner Rail
4 Repeat steps 1-3 for the second outer rail.
Install the Inner Rails on the Chassis
1 Confirm that the left and right inner rails have been correctly identified.
2 Place the inner rail firmly against the side of the chassis, aligning the hooks
on the side of the chassis with the holes in the inner rail.
3 Slide the inner rail forward toward the front of the chassis until the rail
clicks into the locked position, which secures the inner rail to the chassis.
Press locking tab down.
inner rail released