Harris Nexio G8, Руководство по оборудованию, Страница: 35 / 76

33 Chapter 2 | Installation and Setup
G 8 H a r d w a r e I n s ta l l a t i o n M a n u a l
Copyright © 2014 Harris Broadcast
Proprietary and Confidential
Figure 2-7. Placing the UIO System Fan
Replace the
Onboard CR2032
Battery
If you are replacing the onboard battery make sure to handle the used battery
carefully. Do not damage the battery in any way; a damaged battery may release
hazardous materials into the environment. Do not discard a used battery in the
garbage or a public landfill. Please comply with the regulations set up by your
local hazardous waste management agency to dispose of your used battery
properly.
Power Supply
The G8 system has two redundant 720 or 900 Watt power supplies. The power
modules are hot-swappable, enabling the power supplies to be changed without
powering down the system. These power supplies are auto-switching capable.
This enables the power supply to automatically sense and operate at a 100v to
240v input voltage. An amber light will be illuminated on the power supply
when the power is off. An illuminated green light indicates that the power
supply is operating.
Battery Holder
Lithium Battery