manualshive.com logo in svg

Harris Legacy 99-1300-0, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Harris Legacy 99-1300-0 Скачать руководство пользователя страница 85

Revision B  •  1/03

H

A

R

R

I

S

 

C

O

R

P

O

R

A T

I

O

N

4-1

4

T

he Legacy console is designed to give you

many years of trouble-free operation. If your Legacy

does require servicing, please read this chapter as it

provides information about maintaining and obtain-

ing service for your Legacy.

Parts and Repair Services

The only parts that are field replaceable are fad-

ers, fader knobs, and rotary knobs (see page 4-2

for part numbers). Assemblies may be replaced in

the field, but are generally not field-serviceable.

For servicing, assemblies should be returned to

Harris Technical Services Department.

Legacy technical information (this manual, sche-

matics, SPROM revision information, etc.) are

available at this Internet support site: 

ftp://

ftp.pre.com

. Log in as: 

customer

 (the

username). The password is: 

pacific

. All docu-

ments and schematics are published in PDF for-

mat, so Acrobat Reader 4.0 or later is required.

PARTS ORDERING AND REPAIR
INFORMATION

 Spare modules and assemblies can be pur-

chased through a sales representative or through

the Harris Technical Services Department. To ex-

pedite the ordering process and ensure the cor-

rect parts are ordered, have the Harris part num-

bers available when ordering. For a list of parts,

see page 4-2. Modules and other assemblies may

have lead times exceeding two weeks, so order ac-

cordingly.

Assemblies being returned to Harris for service,

exchange, or credit must have an RA (Return

Authorization) tracking number. This number is

assigned by the Technical Services Department.

Assemblies received without an RA number writ-

ten on the shipping label side of the packaging

may be returned or subject to an additional

handling fee.

To order assemblies or to request an RA, con-

tact Harris by mail, phone, fax, e-mail, or visit the

Harris Website:

Harris Corporation
Attention: Technical Services Department
4240 Irwin Simpson Road
Mason, OH 45040 USA

Phone: 513.459.3503, 8:00 to 5:00 EST
Fax: 513.701.5309
E-mail: [email protected]

www.broadcast.harris.com

All U.S. orders and serviced assemblies are

shipped FOB Mason, Ohio using UPS Groundtrak,

unless otherwise specified. Federal Express or UPS

two-day, overnight and next morning delivery is

also available for most items. For next day deliv-

ery, orders must be placed before 2 p.m. Eastern

Time, and the shipping method must be specified

at the time of order.

Assembly orders or repair services can be

charged to American Express, VISA, or

Mastercard. Orders may also be shipped COD, if

not on account with Harris. Contact a sales repre-

sentative for account information.

Maintenance

Содержание Legacy 99-1300-0



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды