Harris CM-30, Руководство по установке и эксплуатации

Страница: 117 / 157

4 – Configuration & Operation NetXpress LX & CM-30 Installation & Operation Manual
Version 1, September 2010
Harris Corporation 4-71
Intraplex Products
Submit: Click this button to save and apply all changes on this page.
Figure 4-65. Web Interface User Accounts | Add a User Account
User name: Type a name for this user account.
User password: Type a password for the user name.
User group: Select a group for this user account: admins or basic .
Enable user account: Clear this check box to create but not activate the user account. The check
box is selected by default; when this check box is selected and you click Submit , the user account is
both created and activated (enabled).
Close: Click this button to exit the dialog box without saving any entries.
Submit: Click this button to apply the new entries on this page.
Figure 4-66. Web Interface User Accounts | Add a User Account
User name: The name of the user account; this field is read-only.
User group: Select a group for this user account: admins or basic . (This field is read-only for
admins user groups.)
Enable user account: Clear this check box to create but not activate the user account. The check
box is selected by default; when this check box is selected and you click Submit , the user account is
both created and activated (enabled).
New password: If you are changing a password, type it in this field.
Confirm password: Retype the password in this field.
Current password: If you are changing an account password, type the existing password in this
field.
Close: Click this button to exit the dialog box without saving any entries.
Submit: Click this button to apply the new entries on this page.
4.3.7.2 IP Access List
The IP Access List table contains a list of IP addresses allowed to manage the system via the
interface. If the list is empty, any address on any interface can access the system. To access the page
(Figure 4-67), point to
Networking and click IP Access List .