Harper DewEze 600 Series, Руководство пользователя

Страница: 73 / 85

Pivot Squeeze
ii 6.7
9. Attach power harness as indicated.
10. Attach 30-amp fuse holder to positive terminal on battery, run wire through switch
on dash and then to the red wire on the harness.
11. Attach suction hose and pressure hose to pump with adapters provided.
12. Attach suction hose to bottom of reservoir.
13. Run battery cables through hole in toolbox and attach to E/H motor as indicated.
14. Run battery cables along frame rail and attach black cable to negative terminal
on battery.
15. Attach 200-amp fuse holder to positive battery terminal.
16. Insert 200-amp fuse.
17. Attach red cable from E/H ontop of “ice cube” fuse. Install rubber cap.
If installing the 735021 Switch Unit — Read the E/H Hybrid specific
instructions first.