Harper DewEze 600 Series, Руководство пользователя

Страница: 61 / 85

Pivot Squeeze
Harper Industries Operator’s Manual
Appendix I –
GatorHy de Repair Instructions
GatorHyde Repair Instructions
Required items:
1 – 25 x 25 ml caulking gun (202030)
1 – 25 x 25 ml cartridge set of GatorHyde Repair Material (202031)
1 – ¼” x 6” mixing wand (202032)
1 – pair of rubber gloves
1 – wooden stick
1 – Instruction sheet and MSDS sheet
1 – MEK – methyl ethyl ketone solvent (available at most
hardware stores)
1 – small paint brush
2 – plastic cups
Note:
This repair is designed to easily fix small, damaged areas fast and with limited amount of effort. However this
product is fast reacting so make sure to thoroughly read this instruction sheet before proceeding with repairs.
Application Instruction:
Step 1. Before you start, put on rubber gloves and safety glasses.
Step 2. Place a piece of cardboard or newspaper next to the repair area prior to opening and mixing the
material.
Step 3 . Cut back damaged area with a razor knife to make a square.
Step 4. Sand area and feather edges with 40 grit sandpaper. Blow out sanded area to get rid of dust.
Step 5. Clean area well with MEK solvent and allow to dry for 30 minutes.
Step 6. Attach static mixing wand to 25 x 25 ml cartridge set, twist and lock in place. Insert cartridge into
caulking gun.
Step 7. Hold the caulking gun in an upright position in one hand, then set the two plastic cups on a flat
surface side by side. Next point the static mixing wand into a cup and squeeze the trigger of the
gun two times so a small amount of material is discharged into the cup. (Note! This material is to
be discarded.) Immediately move the static mixing wand over and point it into the next cup and
continue to discharge the remaining amount of material into this cup.
Step 8. Allow the material to set in cup and gently stir with wooden stick for a period of 1 to 1 ½ minutes or
until the GatorHyde becomes thicker and will stick to either a finger or wooden stick.
Step 9. Once material has begun to gel, apply enough product to finger or a stick and immediately dab
onto damaged area. Use the paint brush to dab the area in a vertical manner to make a textured
surface.
Cure time. Allow repaired area to cure for a period of 1 hour prior to heavy impact loading.
Clean-up.
In order to clean up the area take a paper sack or plastic trash bag and place all the empty jars
and remaining contents of the repair kit and dispose into a standard trash can or simply put
everything back in the box and throw away.
GatorHyde Protective Coatings, Inc., 2210 South Highway 69, Wagoner, OK 74467 * (918) 485-2835 *
www.gatorhyde.com
SAFETY WARNING!
Read the Master Safety Data Sheets
(MSDS) on all chemicals before
handling any chemical.
See: http://www.msds.com
6.1