Harper 301012, Руководство оператора

Страница: 12 / 32

HK4400
10
Guards & Shields
• Keep all safety devices in place.
• Replace all worn, damaged, unusable,
missing or lost safety shields and
guards before operating the equip-
ment.
• Keep the equipment in good operating
condition.
Battery
SAFETY WARNING!
Batteries can produce explosive gas.
Use extreme caution when working on
the battery.
• Ventilate when charging battery or us-
ing in an enclosed space.
• DO NOT produce sparks from cable
clamps, tools, or other sources; and
DO NOT allow flames or smoking in
the vicinity of the battery.
• Shield eyes when working near bat-
tery.
Hydraulics
SAFETY WARNING!
Escaping fluid under pressure can
penetrate skin causing serious injury.
To prevent serious injury or death:
• Relieve pressure on system before
repairing, adjusting or disconnecting.
• Wear proper hand and eye protection
when searching for leaks.
• Use wood or cardboard instead of
hands when looking for leaks.
• Keep all components in good repair.
• Do not use any type of heat (welding,
soldering, cutting torch, etc) near
pressurized lines.
Safety Interlocks/Wiring Logic
• To start the machine, it must be in
neutral, and the deck rotor and paddle
must be OFF.
• To turn the deck rotor and paddle ON,
the operator must be in the seat, the
hydraulic oil temperature must be
below 190° F, and hydraulic oil must
be present in the tank.
• There is a 2 second time delay added
to the seat switch to account for
bounce.
• The park brake is applied when the
operator is out of the seat.
Safety Symbols
1. High pressure fluid could be injected into
body.
2. High pressure spray could erode flesh.
3. Hot surface could burn fingers or hands.
4. Never tip machine on soft ground or on a
slope.