1 2
Place the child restraint in the desired seating position and turn the front recline
adjust knob clockwise
(4)
to recline the backrest
UNTIL THE BACKREST LIES
FLUSH ON THE VEHICLE SEAT BACK
(5)
.
! WARNING
: Remove the vehicle headrest if it inhibits the child restraint from lying
flush against the vehicle seat back.
PLEASE USE THE RECLINE THAT ALLOWS FOR THE BEST AND TIGHTEST
INSTALLATION.
Isofix
is used for installing the child restraint
IN CONJUNCTION WITH
the use
of the Top Tether.
!
Isofix connectors can
ONLY
be used if your vehicle has the Isofix anchors installed
and designated Isofix seating positions. Check your vehicle owner’s manual to see
which seating positions may be suitable with Isofix.
If your vehicle is equipped with Isofix anchors, the vehicle Isofix
anchorage points may be visible at the seat crease. If not visible, they
may be marked with this symbol.
Check your vehicle owner’s manual for your vehicle’s exact Isofix locations,
anchor identifications and usage requirements for use with a child restraint.
R E C L I N E
WARNING!
!
FAILURE TO REINSTALL THE HARNESS STRAPS CORRECTLY COULD
RESULT IN SERIOUS INJURY OR DEATH.
WARNING!
!
YOUR CHILD RESTRAINT RECLINES TO ENSURE PROPER INSTALLATION
INTO YOUR VEHICLE. THE CHILD RESTRAINT MUST BE INSTALLED SO
THAT ALL OF ITS SURFACE AREA IS IN CONTACT WITH YOUR VEHICLE
SEAT.
INSTALLING CHILD RESTRAINT IN HARNESS MODE:
ISOFIX AND TOP TETHER
I S O F I X