User Manual
Operation and Management
Page 4-54
(Rev. 4.1/ SW v1.60/ December 2006)
PID
menu includes the following parameters:
•
Select from Service
- This table menu lists all available PIDs on the
received transport-stream. It allows selection of specific PIDs from a service
to be filtered. The
select from service
table menu consist of the following
parameters:
•
NAME
– The service name
•
ID
– The service identification symbol [Hex]
•
TYPE
Service type options: TV, Radio, TLTX, NVOD, MOSAIC, PAL,
SECAM, MAC, FM, NTSC, and Data.
•
MODE
– Indicates if the service is encrypted (
CAS
) or free to air (
FTA
).
For example:
NAME
ID
TYPE
MODE
1
PROGRAM1
000A
TV
FTA
When selecting a Service listed at the
Select from Service
table menu, a
list of all available PIDs of the selected services is displayed, and the user
can select specific PIDs.
For example:
000A
1
SELECT ALL
2
{
REMOVE ALL
3
{
0100-PMT
4
{
0101-PCR
The selected service's
ID
is displayed at the title. The first two parameters
of every service list are:
•
SELECT ALL
– Select all PIDs of the current service.
•
REMOVE ALL
– Remove all PID's of the current service.
The rest of the list includes available PIDs next to the PID' type.
•
ADD
- This parameter allows the user to manually add PIDs by using the keypad
and enter the PID symbol [Hex]. The available values range is
0000
to
1FFF
[Hex].
•
Remove
- This parameter allows the user to manually remove PIDs from
being filtered by using the keypad and enter the PID symbol [Hex]. The
available values range is 0000 to 1FFF [Hex].
•
Selected List
- This screen displays all selected PIDs, For example:
010A
.
•
Clear All
- This parameter allows clearing all selected PIDs-to-filter list. The
available options are:
