Harmonic ProView 7000, Руководство по установке

Страница: 6 / 37

© 2014 Harmonic Inc. All rights reserved. 6 ProView 7000 Release 3.4, Rev A
Chapter 1
ProView™ 7000 Installation Guide
Topics:

Inventory Check

Earthing

Power Supply to the Unit

Installing the Unit in a Rack

Electrical Power Connection

Connecting the Cables

Switching On
Inventory Check
Before installation, ensure that all the equipment and the attached parts are available and
undamaged, according to the following list:
Table 1: Inventory
Item Quantity
ProView 7000/7100 Unit 1
Power cable 1
CAUTION:
If anything is missing or damaged, do not continue with the installation and report to your
Harmonic support representative.
Earthing
The unit must be connected to earth before any other cables are connected and it should remain
permanently connected to protected earth. Cable 18AWG should be used. When the unit is rack ‐
mounted, the device’s earth stud must be connected to the rack housing, which must be correctly
earthed. When removing cables the earth must be removed last.
Grounding jack screw
Figure 2: AC Connector