Harmonic Electra9200 Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 115

background image

© 2015 Harmonic Inc. All rights reserved.

87

Electra 9200, Rev O

Appendix E

Safety and Regulatory Compliance Information

Legal Disclaimer

: Information in this document is provided in connection with Harmonic

products. Unless otherwise agreed in writing Harmonic products are not designed nor intended
for any application in which the failure of the product could cause personal injury or death.

NOTE:

The information in this appendix may apply to purchased products only.

Important Safety Instructions

This section provides important safety guidelines for operators and service personnel. Specific
warnings and cautions are found throughout the guide where they apply, but may not appear
here. Please read and follow the important safety information, noting especially those instructions
related to risk of fire, electric shock or injury to persons. You must adhere to the guidelines in this
document to ensure and maintain compliance with existing product certifications and approvals.
In this document, we use “product,” “equipment,” and “unit” interchangeably.

This equipment generates, uses, and can radiate radio frequency energy. It may cause harmful
interference to radio communications if it is not installed and used in accordance with the
instructions in this manual. Operation of this equipment in a residential area is likely to cause
harmful interference If this occurs, the user will be required to correct the interference at his or
her own expense.

In event of conflict between the information in this document and information provided with the
product or on our website for a particular product, this product documentation takes precedence.

Safety Symbols & Translated Safety, Warning & Caution Instructions
(English)

To avoid personal injury or property damage, before you begin installing or replacing the product,
read, observe, and adhere to all the following safety instructions and information. Harmonic
products and/or product packaging may be marked with the safety symbols used throughout this
document, when it is necessary to alert operators, users, and service providers to pertinent safety
instructions in the manuals.

«
...
92
93
94
95
96
...
»

Содержание Electra9200




















































































































Отзывы:

Нет отзывов

Похожие инструкции для Electra9200

Бренд: Xantrex Страницы: 76

Бренд: XINDAK Страницы: 9

Бренд: IDK Страницы: 44

Бренд: C&C TECHNIC Страницы: 2

Бренд: Coleman Страницы: 12

Digital Video Scaler Series DVS 304 AD

Бренд: Extron electronics Страницы: 96

Бренд: ADF Web Страницы: 25

Бренд: Kramer Страницы: 30

Бренд: Nextar Страницы: 27

Бренд: Audio Technica Страницы: 11

Бренд: Transition Networks Страницы: 7

Бренд: DX Engineering Страницы: 4

Бренд: Axis Страницы: 114

Бренд: Black Box Страницы: 10

Бренд: Phoenix Contact Страницы: 34

Бренд: Puls Страницы: 27

Бренд: M2TECH Страницы: 49

MAXX SST 1000 VEC049

Бренд: Vector Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды