Harmar Mobility Pride DE/FULL, Руководство пользователя

Страница: 21 / 30

Outlander Series www.harmar.com 21
V. B AT T E RY C H A R G I N G
BATTERY REPLACEMENT
WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds. Wear
goggles and gloves when handling batteries and wash hands after handling.
MANDATORY! Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions.
WARNING! Corrosive chemicals contained in battery.
WARNING! Keep tools and other metal objects away from battery terminals. Contact with tools can
cause electrical shock.
WARNING! Connect the battery harnesses in the proper manner. RED (+) cables must be connected
to positive (+) battery terminals/posts. BLACK (-) cables must be connected to negative (-) battery
terminals/posts. REPLACE cables immediately if damaged. Protective caps must be installed over all
battery terminals.
Figure 23. Battery Replacement
BATTERY BOX
BATTERY
SECUREMENT
STRAP
BATTERY SECUREMENT
BRACKET
BATTERY
CONNECTOR
NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag
and contact your local waste disposal agency or your authorized Harmar Dealer for instructions
on disposal and battery recycling, which is our recommended course of action.
To replace the onboard battery (see figure 23):
1. Unfasten the battery securement strap located at
the bottom of the battery box.
2. Remove the hardware from the battery securement
bracket and remove the bracket.
3. Remove the hardware from the battery connector.
4. Slide the battery out of the battery box to expose
the battery harness.
5. Disconnect the battery harnesses from the battery
terminals.
6. Connect the battery harnesses to the new battery.
7. Slide the new battery into the battery box.
8. Reinstall the hardware to secure the battery
connector and tighten.
9. Reinstall the battery securement bracket and
tighten the hardware.
10. Refasten the battery securement strap.