Harmar Mobility Pride DE/FULL, Руководство пользователя

Страница: 20 / 30

20 www.harmar.com Outlander Series
V. B AT T E RY C H A R G I N G
BATTERY CHARGING
To charge the onboard battery:
1. Remove the onboard battery case from the battery
case bracket and place it near a standard electrical
outlet.
2. Plug the charger cord into the mating socket
located on the bottom of the battery case, then
connect the charger cord to a standard electrical
outlet. See figure 22.
MANDATORY! Read the battery charging
instructions in this manual and in the manual
supplied with the battery charger before charging
the battery.
PROHIBITED! Never use an extension cord to plug
in your charger cord. Plug the charger cord directly
into a properly wired standard electrical outlet.
Figure 22. Battery Charging
PROHIBITED! Removal of the grounding prong can create an electrical hazard. If necessary, properly install an
approved 3-pronged adapter to an electrical outlet having 2-pronged plug access.
PROHIBITED! Do not allow unsupervised children to play near the lift system or battery charger while the
battery is charging.
PROHIBITED! Do not expose the battery charger to rain or other sources of moisture unless it has been tested
for outdoor use. Refer to the manual supplied with the battery charger for more information.
WARNING! Explosive gases may be generated while charging the battery. Keep the battery and the battery
charger away from sources of ignition such as flames or sparks and provide adequate ventilation when
charging the battery.
WARNING! Do not attempt to charge the battery and operate the lift system at the same time.
WARNING! Do not attempt to wire the lift system directly to the vehicle battery if the lift system is equipped
with an onboard battery.
WARNING! You must recharge the lift system battery with the supplied battery charger. Do not use an
automotive-type battery charger.
WARNING! If the battery is exposed to adverse or extreme weather conditions, then it must be allowed to
adjust to the difference in environmental conditions before being charged.
WARNING! Inspect the battery charger, wiring, and connectors for damage before each use. Contact your
authorized Harmar Dealer if damage is found.
WARNING! Do not attempt to open the battery charger case. If the battery charger does not appear to be
working correctly, contact your authorized Harmar Dealer.