Date printed: 24.01.12
49
D21m System
S1
EF
AB
CD
ON
Default Setting:
S1
12
34
ON
Default Setting:
LEDs
SDI LOCK
Indicates a valid (HD or SD) SDI signal at the input.
HD
Indicates a valid HD SDI signal at the input.
DIP Switches
S1
Switch Setting
1
OFF: Enable de-embedder
(factory default)
2
OFF: Enable embedder
(factory default)
3
OFF: SRC bypass
(factory default)
4
reserved
(must always be OFF)
DIP Switch on SDI Module
Switch Setting
A
OFF: De-embedder groups 1&2
(factory default)
ON: De-embedder groups 3&4
B
OFF: Embedder groups 1&2
(factory default)
ON: Embedder groups 3&4
C
ON: All audio data in SDI will be cleared
(factory default: OFF)
D
OFF: no delay
(factory default)
ON: 40 ms delay on all 8 SDI in channels
E
OFF: transparent for channel status bit
ON: generate channel status bit
(factory default)
F
OFF: NTSC 525 test pattern is generated if no SDI input signal is present
(fac-
tory default)
ON: NTSC 1080i60 test pattern if no SDI input signal is present
