Harman® • P35i-C Owner’s Manual_R3 • 2019 -___ • 03/20
13
8390-784C
8. Before reinstalling the access cover, make sure the
insulation between the two layers is in tact.
9. Whenever the hopper is empty, inspect and remove any
large amounts of sawdust or fines. Although this finer
material will mostly feed through with the fuel, large
quantities of sawdust may restrict feeder flow.
Exhaust Chamber
Access Cover
Figure 2.9
Insulation
Figure 2.10
Caring for your Glass-
The glass used in your stove is manufactured to exact
standards to withstand the high heat of the fire, but like all
glass, it must be treated with common sense and care. Never
abuse the glass by slamming the door shut or striking the
glass with a heavy object. If the glass is broken or damaged,
do not operate the stove until it has been replaced.
Glass - Replacement
If the stove’s glass is cracked or broken, you must replace
it before operating your stove. Remove pieces carefully.
Replace glass only with Harman
®
replacement glass;
do
not use substitutes.
Carefully remove damaged glass, gasket material, and hold
down clips (set aside).
Install the self adhesive 1/4”” gasket material around the front
face of the glass. Set the glass panel and gasket gently onto
the door. Install the hold down clips and tighten with bolts.
Glass - Cleaning
Sometimes it will be necessary to clean accumulated ash
from the glass surface; allowing this ash to remain on the
glass for long periods can result in “etching” due to the acidity
of the ash. Never clean the glass while it is hot, and
do not
use abrasive substances. Wash the surface with cool water,
and rinse thoroughly. You may wish to use a non-abrasive
cleaner specifically designed for use on stove glass. In any
case, dry thoroughly before relighting your stove.
Figure 2.14
Retainers and screws
Glass
Adhesive gasket
Door Frame
