Harman Martin ELP WW IP, Руководство пользователя

Страница: 17 / 39

Martin® ELP WW IP User Manual 17
Fixture Setup
This section explains the fixture characteristics you can set that determine how it can be controlled
and will behave. You choose the settings using the menus available from the control panel, and
they are retained even when the fixture is powered off.
Op
tions can also be set over the DMX line using RDM from a suitable controller, see “Setting
options by RDM
” on page 22.
A complete map of the control menu structure and brief explanations of their purposes can be
found
in “Control menus” on page 29. Only the most-used functions are described in this section.
Using the control menus
See drawing above.
Use the fixture’s control panel as follows:

To access the control menus, press the MENU button.
Navigate the menu structure using the ENTER, DOWN

and UP

buttons.

To select a menu option or to confirm a selection, press the ENTER button.

To return to a higher level in the menu structure without making a change, press the MENU
button.

To exit the control menus completely, press and hold the MENU button.
Control panel display
See drawing above. When you power the fixture on it resets and then shows the following data in
the control panel display:

Name of product

Temperature of LED module

DMX address currently used

DMX Channels currently occupied
The display flashes when the fixture is not receiving a valid DMX signal.
MENU ENTER
ELP WW IP LED 25C
001
DMX RANGE 1-5

