Harman Martin ELP WW IP, Руководство пользователя

Страница: 29 / 39

Martin® ELP WW IP User Manual 29
Control menus
To access the control menus, press the MENU button. Use the UP and DOWN buttons to navigate
the menus. Select any required menu option using the ENTER button. For more information, see
‘Using the control menus’ on page 17.
Default fixture settings are shown in bold .
Top Menu Menu level 2 Menu level 3 Menu level 4 Notes
DMX Setup DMX Addr 1 - XXX DMX address (default
address = 1) . The
DMX address range is
limited so that the
fixture will always have
enough DMX
channels within the 512
available.
DMX Mode 1CH/2CH/ 4CH DMX control mode
Personality Stand-Alone Off
Master Fixture acts as master in
master/
client
operation -
DMX/RDM signal will
override master/
client
operation
C lient
Fixture copies master in
master/
client
operation -
DMX/RDM signal will
override master/
client
operation
Dim Curve Linear Optically linear dimming
curve
Square
Square law dimming curve
Inv Sq
Inverse square law
dimming curve
S-Curve S-curve (fixture emulates
incandescent
lamp voltage linear RMS
dimming curve)
PWM Freq 600-1200Hz LED PWM frequency
(Default = 1200 Hz)
No Data Blackout If data connection is lost,
fixture will blackout
Hold If data connection is lost,
fixture holds latest received
data value at all channels