Harman Martin ELP CL IP, Руководство пользователя

Страница: 9 / 40

Martin® ELP CL IP User Manual 9
Introduction
The ELP CL IP from Martin® is an IP65-rated LED-based ellipsoidal/profile lighting fixture with a
260 W red, green, blue, amber & lime LED engine that produces a sharp gobo projection with a flat
field. The fixture can be used in indoor and outdoor locations.
Four fixed beam angle lens tubes and two zoom lens tubes are available for the fixture. We
recommend that you order the lens tube of your choice at the same time as ordering the fixture
body.
The fixture provides a calibrated color mixing system that offers 2 modes of operation:

High-quality mode with a CRI of 90 and CCT of 5500 K at 5900 lumens output

High-performance mode with a CRI of 85 and CCT of 6000 K at 6900 lumens output.
The fixture has 16-bit dimming with 4 selectable curves. It includes innovative features including a
gear-based fine focus system which is still compatible with industry standard accessories. The
fixture is ideal for theatre, gobo projection, art lighting, architectural lighting and key lighting
applications.
The Martin ELP CL IP can be controlled using any DMX-compliant controller and can be remotely
configured by RDM. It also features stand-alone operation with capacity for up to 20 scenes.
The fixture is supplied with this user manual and a yoke for attachment of suitable user-supplied
rigging clamps.
Before using the product for the first time
1. Read ‘Safety information’ on page 5 before installing, operating or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using the fixture. Do not
attempt to operate a damaged fixture.
3. Before operating, ensure that the voltage and frequency of the power supply match the power
requirements of the fixture.
4. If the fixture is not going to be hard-wired to a mains supply, install a local power plug (not
supplied) on the end of the supplied power cable.
5. If fixtures are exposed to a sudden temperature change, give them time to warm or cool to the
ambient temperature before applying power. This will help avoid damage due to condensation.
6. Check the support pages on the Martin website at www.martin.com for the most recent user
documentation and technical information about the fixture. Martin user manual revisions are
identified by the revision letter at the bottom of the inside cover.