6
Martin PDE Junction Box / Break-In / Break-Out Cable user guide
not reapply power until repairs have been completed
Before using the product, check that all power distribution equipment and cables
are in perfect condition and are of suitable type for the location (including water,
pollution, temperature and UV resistance).
Do not immerse the product in water or any other fluid, or install it in a location
where flooding may occur.
When connecting multiple products in a daisy chain, observe the safety limits in
section “Safety limits for connecting devices” on page 12.
Protection from burns and fire
Do not operate the product if the ambient temperature (Ta) exceeds 40° C (104°
F).
The surface of the product can reach up to 55° C (131° F) if the product is operated
at the maximum permitted ambient temperature. Allow the product to cool for at
least 5 minutes before handling.
Install the product on a non-combustible surface (brick, concrete, plaster etc.) only.
Allow at least 0.1 m (4 in.) free space around the product.
Do not attempt to bypass thermostatic switches or fuses.
Do not modify the product in any way not described in this manual or install other
than genuine Martin® parts.
Protection from injury
Fasten the product securely to a fixed surface or structure when in use. The
product is not portable when installed.
Ensure that all supporting structures, surfaces, fasteners and lifting equipment can
bear the weight of all the devices they are intended to support plus an adequate
safety margin, and that they conform to local building and safety regulations.
Block access below the work area and work from a stable platform whenever
installing, setting, adjusting, or cleaning the product.
Do not operate the product with missing or damaged covers or shields.
If an operating problem occurs, stop using the product immediately and disconnect
it from power. Do not attempt to use a product that is obviously damaged.
