5
N
0
585/ N
0
585.5 INTEGRATED AMPLIFIER
/
OWNER’S MANUAL
ENGLISH
SETUP MENU
The following settings are available only for the digital inputs.
PCM Filter: This setting lets you set the filter characteristic for
PCM content:
Fast: This filter has a steep roll-off characteristic that may be
better suited when listening to electric or electronic music.
Slow: This filter has a gradual roll-off characteristic that is
well suited to most types of music.
Mphas: This is a minimum-phase filter that may be better
suited when listening to acoustic music.
Although the above descriptions are offered as a guide, feel free
to set the PCM filter according to your own tastes.
DSD Filter: This setting lets you set the filter characteristic for
DSD content. You can select from roll-offs that begin at 47kHz,
50kHz, 60kHz or 70kHz. The sonic effects of the different roll-off
characteristics are subtle and will vary depending on the type of
musical content, so feel free to set the DSD filter according to
your individual taste.
Clari-Fi
™
: Setting this to ON activates the Clari-Fi circuitry
for the input. Clari-Fi analyzes compressed digital audio files
during playback and reconstructs much of what was lost in the
compression process. The Intensity control adjusts the amount
of reconstruction applied to the signal, and can be applied
according to your individual taste – there is no “correct” amount.
The following settings are available for the Phono input on the
N
0
585.5 only.
Cartridge Type: This setting enables selection of moving-
magnet (MM) or moving-coil (MC) cartridge. Resistive Loading:
this option sets moving-coil cartridges’ resistive loading
between 50 and 1000 ohms. Capacitive Loading: this option sets
capacitive loading between 50 and 680 pF.
Infrasonic Filter: This option sets the infrasonic “rumble” filter
on or off.
Gain: This option selects High or Low gain for the Phono input.
Balance: This option applies balance from -3dB to +3dB in 0.1
dB steps to the Phono input.