4
N
0
585/ N
0
585.5 INTEGRATED AMPLIFIER
/
OWNER’S MANUAL
SETUP MENU
SETUP MENU
This section explains the use of the Setup menus on your N
0
585,
which allow you to customize and configure the unit.
SETUP MENU NAVIGATION
Pressing the Setup button displays the Setup menu on the
integrated amplifier’s front-panel display. When the Setup
menu is active, use the Select knob to scroll through options,
the Enter button to select and deselect options, and the Volume
knob to adjust parameters. To move back a level in the menu
structure (or exit the Setup menu), press the Setup button
repeatedly until the desired menu is shown in the display.
INPUT SETUP
Input Setup
Input 1 [XLR]
Input 2 [RCA1]
Input 3 [RCA2]
Input 4 [RCA3]
Input 5 [Phono]
Input 6 [AES/EBU]
Input 7 [Coax1]
Input 8 [Coax2]
Input 9 [Opt1]
Input 10 [Opt2]
Input 11 [USB]
Set Input X
Name=XXX
Offset=XXX
SSP=XXX
PCM Filter=XXX
Available only for
digital inputs
Available only for
Phono inputs on
the N
0
585.5 only
Available only for
analog inputs
Clari-Fi=XXX
Phono Type
Ph Gain
Ph Balance
Infrasonic Filt
R Load
C Load
Setup Menu
Input Setup
Power Mgmt
Volume Control
Advanced
Output
The Input Setup menu allows you to customize the following
parameters for the selected input:
The following settings are available for all inputs.
Name: This option offers a choice of preset names for the
selected input (CD, SACD
™
, DVD, Blu-ray
™
, DAC, EQ, Input
[number], [Input type], [Input connector]. Additionally, the
following special names are available for each input:
Unused: This option removes the selected input from the list
of available inputs. The input will be skipped when selecting
the active input.
Manual Entry: This option allows you to enter a custom
name for the selected input. Use the Select knob to select
the character you want to change, use the Volume control
to choose from the list of available characters and press
the Enter button to confirm each character. After the eighth
character is entered, the new name will be saved.
Note that Input 5 is reserved for future use.
Offset: The output level of audio devices can vary from brand-to-
brand and model-to-model, making some devices sound louder
or quieter than others. The Offset adjustment lets you precisely
compensate for that variance, allowing all associated devices in
your system to output at a similar volume level.
The setting offers a range of –12.0dB to +12.0dB, in 0.1dB steps,
Whenever an input is selected, the N
0
585 applies the setting of
the Offset parameter to the volume level of the Speaker and
Line outputs.
SSP: The SSP setting configures the selected input for complete
integration with a multichannel surround sound processor. See
SSP Setup on page 10 for more information. (Note: The SSP
setting is only available for analog inputs.)