Harman Mark Levinson 519, Руководство пользователя

Страница: 6 / 24

4 N
0
519 AUDIO PLAYER / OWNER’S MANUAL
INSTALLATION CONSIDERATIONS
OPERATING STATES
The player has three operating states:
• Off: The AC mains power is disconnected by using the rear-
panel Power switch or by removing the power cord from
the rear panel.
• Standby: The Standby mode has three settings that can
be selected via the menu system: Green, Power Save, and
Normal.
o Green: This mode removes power from almost all of
the circuits, allowing the unit to be activated only via
an IR control signal, a 5V – 12V trigger or a press of
the Standby button.
This mode provides maximum
power conservation and is the factory-default
Standby mode.
o Power Save: This mode removes power from the
audio circuits, but keeps the control and streaming
circuitry powered and ready to receive commands.
This mode provides moderate power conservation.
o
Normal:
This mode shuts off the display and mutes its
audio outputs, but keeps all of its control, streaming,
and audio circuits powered. This mode provides the
least amount of power conservation but allows the
audio circuits to remain warmed up to deliver optimal
performance at all times.
• On: The entire unit is powered up and all configured outputs
are active.
The player has an Auto Off feature that automatically places it
into the Standby mode after 20 minutes of no user control input
or audio signal passing through the unit. The factory-default
setting for the Auto Off feature is on (engaged). You can disable
the Auto Off feature in the menu.
UPDATES
Having the most up to date software on your № 519 is important
for the best reliability and function.
Once connected to the internet (See
Quick Setup and Listen
> Wi-Fi Setup for steps on how to connect), your unit will
automatically search for new updates. If new updates are found,
the № 519 will notify you via a gear icon present at the top of the
screen. To install these updates, navigate to
Settings > System
>
Update Firmware > Check for update online.