Harman Lexicon MX400, Руководство пользователя

Страница: 37 / 64

Depth
Scales the intensity of the effect. This control affects the output of the LFO only. It has
no effect on the outputs of the individual waveforms.
Voices
Controls the number of additional Chorus voices.
Regen
Controls the amount of modulated signal being fed back into the input, creating feed-
back. Higher amounts add more resonance to the signal.
Diffusion
Creates a time-smoothing effect similar to diffusion in reverb. Diffusion can be a
subtle effect to add a little warmth to the chorus.
PreDelay
Determines the amount of offset between the two signals that create the flange effect.
Lower values create a tighter effect, higher values result in a more extreme "whoosh-
ing" sound.
Waveform
Selects the wave pattern used by the modulated effect.
Phase
Controls whether amplitude or depth change occurs in both left and right outputs simul-
taneously or alternates between left and right outputs.
Phase Stages
Selects between a 4, 8, or 12 state phase shifter.
Stereo Spread
Increases or decreases the stereo imaging of the Rotary effect.
Drive
Provides overdrive gain to the preamp section of the rotary speaker effect.
Minimum Speed
Sets the minimum speed at which the effect will oscillate.
Maximum Speed
Sets the maximum speed at which the effect will oscillate.
Doppler
Increases or decreases the Doppler pitch effect that is created by the physics of a rotating
speaker.
29
Effects Descriptions
MX400