Harman Lexicon MX400, Руководство пользователя

Страница: 21 / 64

Using the MX400
3. When naming is complete, press the
Store
button again. Turn the
Page/Select
or
Program/Load
knob to select the new user program memory location to store
to.
4. Press the
Store
button again to complete the store procedure.
eDItInG a ProGraM
Once a program has been loaded, you may find you want to make adjustments to it for
your particular application. Editing of programs is done using the
Page/Select
and
three
Edit Knobs
(
A
,
B
, and
C
) to the right of the
Main Display
. Each effect can
be edited independently by selecting it with the
Page/Select
knob. As the effect is
selected, its name is highlighted in the
Main Display
and three parameters become
visible for the effect at the bottom of the
Main Display
. The
Edit Knobs
can then
modify these three top level parameters.
(Fig. A)
Note
: Dual Stereo programs feature a slightly different program screen which dis-
plays both program names. When
Edit Knobs A
,
B
, and
C
are turned, the three
parameters of the selected effect will be displayed momentarily for editing purposes and
then the name of the second program will reappear. (Fig. B shows Tape Delay as the
selected effect in a Dual Stereo Configuration program).
(Fig. B)
Edit Knobs A
,
B
, and
C
will modify the Tape Delay effect’s Tempo, Delay Time, and
Feedback parameters respectively. In addition, Surround and Stereo Configuration
program effects have several other parameters that can be modified from the
Edit
Effect
menus.
Editing From the Program Display
1. While on the program screen, turn the
Page/Select
knob to highlight the effect
you want to edit.
13
MX400