Harman Lexicon MX400, Руководство пользователя

Страница: 25 / 64

Using the MX400
17
SurrounD confIGuratIon
Surround
Reverb
L
R L
R
1. Stereo In/Surround Out
(Front)
(Front)
L
R
(Rear)
Surround
Reverb
L
R
L
R
2. Surround In/Out
(Front)
(Front)
L
R
(Rear)
L
R
(Rear)
1. Stereo In/ Surround Out
This routing option takes a stereo source connected to the Left 1 and Right 1 (Front)
inputs, processes them through the Surround reverb, and sends it to all four outputs.
Note
: Only a single mix control for the Left/Right front outputs is available with this
routing. The Left/Right rear outputs are always 100% wet processed.
2. Surround In/Out
This routing option takes a surround input source connected to all of the MX400
inputs, processes through the Surround reverb, and sends it to all four outputs.
eDItInG effect MIX/routInG
1. While on the Program Screen, press the
Page/Select
knob. This will enter the
Program Edit
menus.
2. Turn the
Page/Select
knob until the Edit Mix/Routing menu is highlighted.
3. Press the
Page/Select
knob to enter the Edit Mix/Routing menu.
4. Turn
Knob A
to select different effect routings for the program. Use
Knob B
and
Knob C
(when available) to adjust the wet/dry mix for each effect.
Note
: In Surround Configuration programs using the Stereo In/Surround Out routing
(1) and in Stereo and Dual Stereo Configuration programs using the stereo routing
(5), there is only one effect available so Effect 2 Mix will not be available.
When finished, store the changes to the program if you would like them to be recalled.
MX400