Harman JBL CS Commercial Solution Series, Руководство пользователя

Страница: 6 / 24

4
Quick Start
1. Connect the included JBL power supply to the POWER jack on the rear panel of the mixer.
2. On the front panel of the mixer, switch the POWER switch to the on position.
3. Connect a stereo audio source to the
SOURCE 1
input. Do not put any audio through the mixer at
this time.
4. Turn the SOURCE 1 GAIN knob, on the rear panel of the unit, all the way counter-clockwise.
5. Turn the ZONE 1 LEVEL knob, on the front panel, all the way counter-clockwise.
6. On the front panel, select source 1 with the ZONE 1 SELECT knob.
7. Connect the
ZONE 1
output to your power amplifier. Make sure the amplifier you are connecting to
is not powered up while making this connection, this will prevent any nasty pops.
8. Turn on your power amplifier.
9. Turn on your audio source.
10. Slowly turn up the SOURCE 1 GAIN knob, on the rear panel, until the SIGNAL LED consistently
lights green.
11. Now turn up the source level by rotating the ZONE 1 LEVEL knob, on the front panel, until you hear
audio through your speakers.
12. Adjust the EQ until the desired tone is achieved.
13. See page 14 to 15 for setting AutoWarmth™ and LevelGuard™ .