Harman AXYS TUNNEL IndustryAmp Dante PB-400-DN, Инструкция по установке и эксплуатации, Страница: 6 / 20

AXYS
®
IndustryAmp-DN User Manual Rev 3.0
201911/IAMPDN_3.0 6
FEATURES
• Transformer-coupled outputs for direct drive of 70 V /
100 V line systems
• Full complementary Class AB output stages
• MOSFET output devices with high current safety
margin
• Stable operation under all normal conditions
• Two transformer-balanced analogue inputs (0 dBV)
• On-board DSP, providing control of level, EQ, delay,
etc. on all inputs and outputs
• Full configuration, control and monitoring using
AXYS
®
WinControl software
• Non-volatile storage of all amplifier parameters
• Control and monitoring via the AxysBridge protocol
by using the Dante
™
Ethernet interfaces
• Pilot tone detection
• ANS (Ambient Noise Sensing) mic input
• Surveillance/failure relay
• DSP bypass function
• Universal power supply (100-240 VAC) with active
Power Factor correction
• Integral dual-redundant Dante
™
audio networking
card
• Sixteen digital audio inputs
• Seventeen digital audio outputs
• Input to amplifier output audio matrix router
WHAT’S IN THE PACKAGING
In addition to the IndustryAmp itself, each unit is shipped
with the following items:
• Installation and User Manual (this document)
• AC power cable (2 m), fitted with a Neutrik
®
PowerCon
®
connector and a Schuko (European-style) mains plug
• AC power cable (2 m), fitted with a Neutrik ® PowerCon ®
connector and a Type B (USA style) mains plug
• Set of mating screw terminal connectors