Harman AMX PR-WP-412 Скачать руководство пользователя страница 12

Страница: 12 / 64

Installation and Wiring

Brackets Installation

Warning:

Before installation, ensure the device is disconnected from the power source.

The PR-WP-412 can be mounted using V Style Surface Mounting Brackets, V Style Single Module Pole Mounting Kit, or

the NMX-VRK V-Style Rack Shelf. For details, see www.amx.com.

Wiring

Warning:

Before wiring, disconnect the power from all devices. Connecting or disconnecting cables while powered, may cause

damage to circuitry or possible injury. Connect and disconnect the cables with care.

Using high quality HDMI cable, firmly connect 4K or HD source devices (such as: Blu-Ray, computer, games console,

satellite/ cable, music streaming device, CCTV etc.) to the HDMI input ports 1-4 of the processor.

Securely connect HDMI OUT 1-4 of the processor to HDMI IN of 4K or HD display devices, make sure all sources and

displays are compatible and correctly configured.

Securely connect AUDIO OUT 1-2 of the processor to audio devices such as amplifier.

Insert the processor DC power cord. The front panel LEDs will lit on to indicate that the processor is ready for

operation.

Warning: Always power off the processor before unplugging any HDMI cables following Last On, First Off protocol.

Switch between sources and displays using the processor front panel buttons, through serial RS232 or LAN.

Содержание AMX PR-WP-412

































































Результаты поиска

Содержание AMX PR-WP-412

Отзывы:

Похожие инструкции для AMX PR-WP-412

Бренды по названию

Популярные бренды

Harman AMX PR-WP-412, Справочник по аппаратуре

Результаты поиска

Содержание AMX PR-WP-412

Отзывы:

Похожие инструкции для AMX PR-WP-412

Бренды по названию

Популярные бренды