Decoder Configuration Options
45
N2312/N2322 User Manual
Network Setup Section
The
Network Setup
section of the
Settings
page is shown in
. Options are described in
.
FIG. 38
Network Setup Section
TABLE 15
Settings Page: Network Setup Section
Option
Description
Notes
IP Mode
Configure the IP address mode. When set to
AUTO IP
, an IP
Address in the range of 169.254.xxx.xxx with
Netmask
of
255.255.0.0 and
Gateway
address
of 169.254.1.1 will be
automatically assigned to the N2322 Decoder by the control
software. When set to
DHCP,
an IP Address in the range of the
DHCP server on the network will be automatically assigned to the
N2322 Decoder Decoder. When set to
STATIC
, an
IP address
,
Netmask
, and
Gateway
address
must be manually entered.
DHCP
is the default setting. However, using
DHCP
beyond initial setup is generally not
recommended. If the device is set to
DHCP
and fails to receive an address from the DHCP
server in time, it will revert back to the
AUTO
IP Address (169.254.xxx.xxx) until the unit is
rebooted.
IP
View the current IP address of the N2322 Decoder. When in
STATIC
mode, enter a new IP address into this field.
Netmask
View the current
Netmask
of the N2322 Decoder. When in
STATIC
mode, enter a new
Netmask
into this field.
Gateway
View the current
Gateway address
of the N2322 Decoder. When
in
STATIC
mode, enter a new
Gateway address
into this field.
Trial Save button
Click to initially save IP address changes. Once you log in to the
unit using the new address, you will be able to confirm and
accept the changes permanently.
Ping Test/Ping button
Test connection by specifying an IP address or URL to ping. Click
the
Ping
button to initiate the test.
