Harman AMX N2300 SERIES, Инструкция по эксплуатации

Страница: 25 / 66

Encoder Configuration Options
25
N2312/N2322 User Manual
Device Settings Section
The Device Settings section of the Settings page is shown in Figure 19 . Options are described in Table 1 .
FIG. 19
Device Settings Section
TABLE 1
Settings Page: Device Settings Section
Option Description Notes
Device Name Enter a user-friendly name for the unit. More descriptive names in this field help you organize
and manage the N-Series system efficiently. Names
based on the unit’s location and function are very
useful. Some good examples are Lobby-Left-VGA (for
left side of lobby, VGA input) or CR201-HDMI (for
Conference Room 201, HDMI input). Keep in mind the
matrices are organized alphanumerically.
TX Enable Enable to broadcast the AV signals. Disable to turn off/
stop broadcasting.
Unit Type Displays the unit type (Encoder or Decoder).
Stream View/edit the current transmit stream number. To better understand this setting, think of Encoders
more like a channel on a cable box, rather than a
traditional AV Matrix. Each Encoder must have a
unique stream number, just like every channel must
have a unique channel number (e.g., Food Network
and HGTV cannot both be on channel 201).
Video Source Select which input port is encoding video. Choices are
Auto , VGA only , and HDMI only .
Selecting VGA only or HDMI only disables the other
video input port.
Selecting
Auto enables both video input ports. If both
audio source types are connected, you cannot define
one or the other as the preferred source. Therefore,
when in Auto mode (and both input types
are plugged in) a preferred mode is undefined.
Live/Local Select live video or locally stored images for
transmission onto the network. When video is not
available, it automatically goes into local mode.
When video is not available, the most recently played
local playlist is displayed.
Audio Mute Enable to stop the transmission of audio data onto the
network.
Enable HDMI Audio Set HDMI audio to be disabled or selected automatically
based on the source.
If set to AUTO, the audio follows the video source. If
HDMI input is active, HDMI audio is active. If analog
video is active, analog audio is active.
If set to OFF , audio is disabled.
Save button Click to save settings made in this section.