Installing the HPX-1600
19
HPX-1600 Retractable Connection Port
Step 10 - Install Shields
1.
Secure the two shields to each other using the 8 supplied screws.
Ensure that any fixed cables pass through the assembled shield appropriately.
2.
Snap the assembled shield onto the lower portion of the mounting sleeve.
3.
Install the four additional mounting screws into the top of the shield to secure the shield to the mounting sleeve (FIG. 22).
FIG. 22
Installing the Shields
Shields
4 screws secure the top
of the Shields to the
Mounting Sleeve
8 screws (4 on each side)
secure the two Shields to
each other
