Installing the HPX-1600
7
HPX-1600 Retractable Connection Port
Note that for terminations for which the far end of the cable is not accessible either because the cable has been run under carpet,
in a conduit or structure, or is otherwise fixed, the cable must be placed through the retaining ring, (note the orientation of the
retaining ring - see FIG. 8 on page 7) then through the mounting surface from bottom to top, then to the module before the module
is placed into the base assembly, as shown in FIG. 7:
Note the direction of the screw bosses, as indicated in FIG. 8:
For mounting surfaces less than 35mm thick, orient the screw bosses away form the main assembly (down). For mounting surfaces
greater than 35mm thick orient the screw bosses toward the main assembly (up).
FIG. 7
Fixed Cable Passing Through Ring, Table and Into the HPX-1600 Assembly
FIG. 8
Direction of the Screw-Bosses, Based On Surface Thickness (19mm vs. >19mm thick)
Mounting Surface
Fixed Cables
Retaining Ring
Fixed Cables
Note the orientation
of the screw bosses.
Retaining Ring
Mounting Surface
Retaining Ring
Mounting Surface
Retaining
Screw
Retaining
Screw
Retaining
Screw
Retaining
Screw
