Installing the HPX-1600
13
HPX-1600 Retractable Connection Port
5.
Secure the cables exiting the bottom cover using the provided wire ties (FIG. 15).
Step 6 - Install the Lift Spring Assemblies
ATTENTION: If modules have been installed in more than 50% of the available space, the performance of the HPX-1600 retract
mechanism may benefit from the installation of the optional accessory HPX-AC-HSP (FG559-42). See the installation guide for
HPX-AC-HSP for further details.
After the bottom cover is fully secure and the exiting cables are secured:
1.
Clip both lift spring assemblies onto the mounting sleeve.
2.
Ensure the lift spring assembly is oriented properly (FIG. 16).
3.
Unlatch the sliding frame and mounting sleeve so the sleeve is free to slide relative to the frame.
4.
Slide the mounting sleeve so that it is nearest to the bottom cover.
FIG. 15
Bottom Cover - Installed with Cables Exiting and Secured
FIG. 16
Lift Spring Assembly Clipped to Main Sleeve
HPX-1600 Chassis
Aluminum Frame (bottom)
Wire Tie
Wire Tie
Bottom Cover
(secured with 4
mounting screws)
Cable
Cable
Lift Spring Assembly
Clip
Mounting Sleeve
(bottom of HPX-1600
Base Assembly
