controls on the receiver
DMS800 MANUAL
89
AUDIO menu
Select the receiver channel CH1 or
CH2 in the submenus GAIN, DSP and
ATTENUATION PAD.
REHEARSAL menu
Scroll through the HF level
9.2
Functions of the CH1, CH2 (10, 12) buttons
9.2.1 Functions in LOCK mode
In the main window
Channel window for parameter overview, no
changes possible
9.2.2 Functions in SETUP mode
In the main window
Channel window for parameter setting, no
changes possible
9.3
Functions of the BACK button (4)
Tap
Close current menu
All unconfirmed values are deleted
Long press
Close all menus
All unconfirmed values are deleted
The main window is displayed
9.4
Functions of the DSP button (2)
The factory settings of the DSP button can be found in section “16.1 DSP
profiles: Factory settings” on page 114.
In the main window
Deactivate the LOW CUT, EQ, COMPRESSOR
and LIMITER functions for the corresponding
channel
In the AUDIO submenu
Set the parameters of the digital signal
processor
CH1, CH2
buttons
BACK‑Taste
DSP button