Harman Kardon SoundSticks III, Руководство по установке

Страница: 4 / 6

4
Specifications*
System
Frequency range: 44Hz – 20kHz
Power consumption: 4W idle, 65W maxi-
mum
Subwoofer
Transducer (1): 6" woofer
Amplifier output power: 20W RMS
Dimensions (W x H): 9-3/16" x 10-3/16"
(232mm x 258mm)
Weight: 4 lb (2.2kg)
Satellite
Transducers (4): 1" full-range per channel
Amplifier output power: 10W RMS per
channel
Dimensions (W x H): 2" x 10" (51mm x
254mm)
Weight: 1.5 lb (0.7kg)
Troubleshooting
Symptom Possible problem Solution
No sound from SoundSticks III speaker
system.
No power to subwoofer.
Power adapter plug not inserted cor-
rectly.
No volume or low volume.
Ensure power supply is connected to live power source and is properly
connected to subwoofer. Please note: When subwoofer is powered, a
power LED should light.
Place plug with arrow symbol facing UP into the subwoofer.
Touch the volume “Up” (+) pad on the volume control satellite to
unmute and/or increase the system volume level.
Note: Touching the volume “Down” (–) pad lowers the system volume.
Touching both (+) and (–) volume control pads at the same time will mute
the system.
R L
SOUNDSTICKS
®
III
*These specifications are subject to change without notice.
R L
Step 1. Place individual
SoundSticks III (satellites)
beside monitor/computer.
Step 2. Place subwoofer
as desired, but placement
under your desk will
provide optimal perfor-
mance.
Step 3. Connect satel-
lite cables to the dual
subwoofer cable. Also
connect the input cable
to the subwoofer input
cable jack.
Step 4. Insert Sound-
Sticks III input cable into
the computer or other
audio device.