Q
uick
-S
tar
t Guide
11
GPS-910NA
EN
G
LI
SH
CR2032/DL2032
Use a coin to remove
the bottom cover.
Push the knob down onto the base,
and turn clockwise to lock it into place.
The knob can be removed by turning
the bottom counterclockwise.
Orient the base so that the arrow is
facing the front of the car.
You can either screw the base to
the mounting location or use the
supplied adhesive pad.
If you use the adhesive pad, you
must FIRST CLEAN the surface with
the supplied alcohol cleaning pad.
Toward front of car
Control Knob Button Operation
Mounting the Control Knob
Select Mounting Location
1
Install Battery
2
Mount Control Knob Base
3
Attach Control
Knob to Base
4
Press once for Center
menu bar item
Press and hold for 2
seconds to suspend
power or turn on
Screen Dependent
Button Function
Press to select the
highlighted menu item
Rotate outer ring to move the
highlight bar on the active screen
If Left or Right button is held for
2 seconds, outer ring becomes
Volume or Brightness adjustment
Press once for Back (Same as
Left button on Screen)
Press and hold for 2 seconds
to adjust Volume Up/Down
from outer ring
Press once for Source (Same
as Right button on Screen)
Press and hold for 2 seconds
to adjust Brightness from
outer ring
