background image

1.

2.

3.

1. Remove battery-compartment cover. 2. Insert a 3-volt 2032 type battery,   

    positive side up.

3. Replace battery-compartment cover.

DC In

USB

S-Video

Auxiliary In

Smart Remote 

storage

compartment

Power Button 

(Green LED)

Volume Down

Volume Up

4

General Setup

1. Unpack the Harman Kardon Go + Play II system.
2. Place the nest into the docking station.
3. IMPORTANT: Turn the adjustable knob in the center of the docking station to support
  your specific iPhone/iPod model properly.
4. Place the iPhone/iPod into the docking station.
5. Connect the power supply into the “DC In” jack.
6. Plug the adapter into the wall outlet.
7. If using batteries is preferred, install eight (8) type D batteries into the bottom of the unit.
8. Turn on the power switch. The green indicator light will turn on.

DO NOT MIX BATTERY TYPES.
DO NOT MIX CHARGED AND PARTIALLY CHARGED BATTERIES.
BATTERIES WILL NOT RECHARGE WHILE IN THE UNIT.

Battery Installation

For Harman Kardon Go + Play II System

1. Unscrew the two battery-compartment cover screws counterclockwise
  to the unlocked position; remove the battery-compartment cover.
2. Place eight (8) fresh D-cell batteries as shown.
3. Replace the battery compartment cover.

Note: System will not use battery power when using AC power.

Battery Disposal

Alkaline batteries are considered nonhazardous. Rechargeable batteries (i.e., nickel cadmium, 
nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials 
and may pose an unnecessary health and safety risk. 

In the European Union and other locations, it is illegal to dispose of any battery with household 
trash. All batteries must be disposed of in an environmentally sound manner. Contact your local 
waste-management officials for information regarding the environmentally sound collection, 
recycling and disposal of used batteries.

For Harman Kardon Smart Remote

Storing Your Smart Remote

The Harman Kardon Go + Play II system is equipped with a storage compartment on the back 
of the unit. Simply press the top of the compartment to open it and store your remote.

General Setup

GO + PLAY II

HARMAN KARDON

Содержание Go + Play II









Отзывы: