Harman Kardon DVD 25, Руководство по обслуживанию

Страница: 19 / 48

VI) On the Power Supply cable, cut the pin 1 harness wire close to the connector on J5.
Solder a new jumper wire to extend the connection from harness wire 1 to U11 pin 3 of the 3.3 volt
regulator (BA033T).
See illustration.
VII) Re-check the mechanism alignment with the front panel by plugging the unit in, turning ON, and
opening and closing the tray with the eject button.
Replace top cover.
Test unit for DVD/CD function.
Model
Serial Number (120v)
Status Action
DVD25
WA-0002-01000
To
WA-0002-10677
Label on ass’y reads:
DVD-KIT500SE
If Replacement Of Laser Pick-Up
Assembly is Needed,
Original KIT500 is no longer stocked
Follow full instructions
above for replacement
DVD25
WA-0002-10678
And above
Label on ass’y reads:
DVD-KIT710SE
If Replacement Of Laser Pick-Up Assembly is Needed,
Order Assembly WLD5.018.011XX Only
19
DVD25/DVD101
harman/kardon