Harman Kardon AVR 510 Скачать руководство пользователя страница 21

Страница: 21 / 56

SYSTEM CONFIGURATION

System Configuration

Since the factory default for all inputs is Stereo,
the phrase

SURR OFF

will initially appear in

highlighted video (Figure 3). To change the sur-
round mode while the

›

cursor is next to the

surround line, press the

‹

›

buttons

until the desired surround mode’s name
appears in the highlighted video. As the modes
are changed, a green LED will also light next to
the mode names in the

Surround Mode

Indicators

on the front panel.

Note that the data lines next to the items in the
screen display will show either numbers or a
series of dashes, depending on whether or not
the specific parameter is adjustable. For exam-
ple, the Center Delay and Night Mode items are
only adjustable for Dolby Digital, and the Delay
Time is only adjusted for Dolby Digital and
Dolby Pro Logic. Note, also, that Dolby Digital
and DTS will only appear as choices (Figure 4)
when a digital input was previously selected.

Depending on the Surround mode selected, you
will now proceed to change either the delay
time or the crossover frequency. For Dolby
Digital and Dolby Pro Logic, pressing the

⁄

buttons on the remote will take you to the

delay settings.

Delay Settings

If Dolby Digital or Dolby Pro Logic is selected as
the surround mode for an input, you may need
to adjust the delay time setting. Note that the
delay time is not adjustable for any other modes.

Due to the different distances between the
listening position for the front-channel speakers
and the surround speakers, the amount of time
it takes for sound to reach your ears from the
front versus surround speakers differs. You may
compensate for this difference through the use
of the delay settings to adjust the timing for
the speaker placement and acoustic conditions
in your listening room or home theater.

The factory setting is appropriate for most
rooms, but some installations create an uncom-
mon distance between the front and surround
speakers that may cause the arrival of front-
channel sounds to become disconnected from
surround-channel sounds.

To resynchronize the front and surround chan-
nels, follow these steps:

1. Measure the distance from the listening

position to the front speakers.

2. Measure the distance from the listening

position to the surround speakers.

3. Subtract the distance to the surround speak-

ers from the distance to the front speakers.

a. When setting the delay time for the

Dolby Digital surround modes, the opti-
mal delay time is the result of that sub-
traction. For example, if the front speak-
ers are ten feet away and the surround
speakers are five feet away, the optimal
delay time is figured as 10–5=5. Thus, in
this example, the delay time for Dolby
Digital should be set at five milliseconds.

b. When setting the delay time for the Pro

Logic mode, take the result of the sub-
traction and add 15 to obtain the opti-
mal delay time. For example, if the front
speakers are ten feet away and the sur-
round speakers are five feet away, the
optimal delay time is figured as
10–5+15=20. Thus, in this example, the
Pro Logic delay should be set at twenty
milliseconds.

NOTE:

The DTS, Logic 7, Hall and Theater

modes use a fixed, nonadjustable delay time.

The Dolby Digital mode also includes a separate
setting for the Center Channel Delay mode,
since the discrete nature of these signals makes
the location of the center-channel speaker more
critical. To calculate the delay for the center
channel, measure the distance from the pre-
ferred listening position in the center of the
room to both the center-channel speaker and
either the left or right speaker.

If the distances are equal, no further adjustment
is required and the center delay should be set to
zero. If the distance to the front speakers is
greater than the distance to the center speaker,
you may wish to reposition the speakers by
moving the front left and front right speakers
closer to the listening position or the center
speaker further away from the listening position.

If repositioning of the speakers is not possible,
adjust the center delay time, adding one milli-
second of center-channel delay for every foot
closer to the listening position the center
speaker is than the front speakers. For example,
if the front left and front right speakers are
each 10 feet from the listening position and the
center-channel speaker is 8 feet away, the delay
is figured as 10–8=2, suggesting an optimal
center delay of 2 milliseconds.

To set the delay time for a specific input,
continue within the

SURROUND SETUP

(Figure 4) menu. If the system is not already at
that point, press the

OSD

button

to bring

up the

MASTER MENU

, press the

but-

ton

and then the

Set

button

to bring

up the

SURROUND SETUP

menu, and

then press the

button

once.

If the Dolby Digital mode is selected, the

›

cur-

sor will stop at the

CENTER DELAY

line.

In that case, press the

‹

›

buttons

until the number calculated using the formula
shown above appears in the display. When the

CENTER DELAY

is entered, press the

button

once to move to the next line.

When the

CENTER DELAY

is set, or if the

Dolby Pro Logic mode is selected, the

›

cursor

will be at the

SURR DELAY

line so that

the delay for the surround speakers may be set.
Press the

‹

›

buttons

until the num-

ber calculated using the formula shown above
appears in the display. When the delay settings
are complete, press the

button

once to

move to the next line.

Note that the delay settings may also be
adjusted at any time when the Dolby Digital or
Dolby Pro Logic modes are in use by pressing
the

Delay

button on the front panel

remote

, followed by a press of the

Set

button

. Next, press the

⁄

buttons

on the remote or the

Selector

buttons

the front panel until the desired figure appears
in the

Main Information Display

Night Mode Settings

The Night mode is a feature of Dolby Digital
that uses special processing to preserve the
dynamic range and full intelligibility of a movie
sound track while reducing the peak level. This
prevents abruptly loud transitions from disturb-
ing others, without reducing the sonic impact of
a digital source. Note that the Night mode is
only available when specially encoded Dolby
Digital signals are played.

To adjust the Night mode setting for an input
from the menu, make certain that the

›

cursor

is on the

NIGHT

line of the

SURROUND

SETUP

menu. Next, press

‹

›

buttons