Harman Kardon AVR 510 Скачать руководство пользователя страница 20

Страница: 20 / 56

SYSTEM CONFIGURATION

System Configuration

Input Setup

The first step in configuring the AVR 510 is to
select an input. This may be done by pressing
the front panel

Input Source Selector

until the desired input’s name appears momen-
tarily in the

Main Information Display

and the green LED lights next to the input’s
name in the front panel

Input Indicators



The input may also be selected by pressing
the appropriate Input Selector on the remote
control

When using the full-OSD system to make the
setup adjustments, press the

OSD

button

once so that the

MASTER MENU

(Figure 1)

appears. Note that the

›

cursor will be next to

the

INPUT SETUP

line. Press the

Set

but-

ton

to enter the menu and the

IN/OUT

SETUP

menu (Figure 2) will appear on the

screen. Press the

‹

›

buttons

until

the desired input name appears in the high-
lighted video, as well as being indicated in the
front panel

Input Indicators



by the green

LED next to the desired input name. If the input
will use the standard left/right analog inputs,
no further adjustment is needed.

Figure 2

If you wish to associate one of the digital
inputs with the selected input source, press the

button

on the remote while the

IN/OUT SETUP

menu (Figure 2) is on

the screen, and note that the on-screen cursor
will drop down to the

DIGITAL IN

line.

Press the

‹

›

buttons

until the name

of the desired digital input appears. To return to
the analog input, press the buttons until the
word

ANALOG

appears. When the correct

input source appears, press the

button

once so that the

›

cursor appears next to

RETURN TO MENU

, and press the

Set

button

To change the digital input at any time using
the discrete function buttons and the semi-OSD
system, press the

Digital Input Select

button

Úq

on the front panel or the remote.

Within five seconds, make your input selection
using the

Selector

buttons on the front panel

or the

⁄

buttons

on the remote

until the desired digital or analog input is
shown in the

Main Information Display

and in the lower third of the video display
connected to the AVR 510. Press the

Set

button

to enter the new digital input

assignment.

An exclusive Harman Kardon feature is the abil-
ity to switch front panel jacks from their normal
use as inputs to output connections so that
portable recording devices may easily be con-
nected. The front panel analog

Video 4 Inputs

are normally set as an input for use with

camcorders, video games and other portable
audio/video products, but they may be switched
to an output for connection to portable
audio/video recorders. To temporarily switch
them to outputs, you must first be at the

IN/OUT SETUP

menu. Press the

button

until the on-screen

›

cursor is

pointing to the

VIDEO 4

line. Press the

›

button

so that the word

OUT

is high-

lighted. Note that the

Input/Output Status

Indicator

between the S and Composite

video jacks will turn red, indicating that the
analog Video 4 jacks are now record outputs.

On the AVR 510, the

Digital Coax 3

jack

is normally an input, but this may also be
switched to a digital output for use with
CD-R/RW decks, MD recorders or other A/V
recorders. To change the jack to an output,
press the

⁄

buttons

while the

IN/OUT SETUP

menu is on the screen

until the

›

cursor is next to

COAXIAL 3

Then press the

‹

›

buttons

so that

the word

OUT

is highlighted. Note that the

Input/Output Status Indicator

will turn

red, indicating that the jack is now a record
output.

NOTE:

A signal will be sent to this jack only

when the input selected for use by the AVR 510
is digital. Digital signals will be passed through
regardless of their format, and which digital
input (optical or coax) they are fed from.
However, analog signals are not converted to
digital, and the format of the signal (e.g., PCM,
Dolby Digital or DTS) may not be changed.

Selection of the front panel jacks as an output
will remain effective as long as the AVR 510 is
on. Once the unit is turned off, the jacks will
revert to their normal use as an input when the
unit is turned on again.

Surround Setup

Once the basic input setup has been com-
pleted, the next step is to set the surround
mode you wish to use with an input. Since

surround modes are a matter of personal taste,
feel free to select any mode you wish – you
may change it later. However, to make it easier
to establish the initial parameters for the
AVR 510, it is best to select Dolby Pro Logic for
most analog inputs and Dolby Digital for inputs
connected to digital sources. In the case of
inputs such as a CD Player, Tape Deck or Tuner,
you may wish to set the mode to Stereo (as
they are not typically used with multichannel
program material), where it is unlikely that
surround-encoded material will be used.
Alternatively, the Logic 7 Music mode is a good
choice for stereo-only source material.

NOTE:

If you have selected Logic 7 C or M as

your surround mode for the current listening
session, and you are using a digital input, and
you have not changed the default surround
mode for that input source to the same Logic 7
mode, then you will notice that if the digital
signal is interrupted for any reason (such as
stopping the source device), upon resumption
of the signal, the AVR 510 will use a different
surround mode. In fact, the AVR 510 will use
whichever mode was set as the default for that
source. The factory default for all sources is
Stereo mode, unless the receiver detects a
Dolby Digital or DTS bitstream.

It is easiest to complete the surround setup
using the full-OSD on-screen menus. From the

MASTER MENU

(Figure 1), press the

⁄

buttons

until the

›

cursor is next to the

SURROUND SETUP

menu. Press the

Set

button