AVR100
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 100’s entire
system, first turn the unit off by pressing and releasing the
Main Power
Switch
so that it pops out from its normal recessed position. Next, press
and hold the
CD
and
Vid 2
buttons while pushing in the
Main Power
Switch
to turn the unit back on.
AVR110
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 110’s entire
system, first put the unit in Standby by pressing the
System Power
Control
button. Next, press and hold the
Tone Mode
and the
FM Mode
Selector
buttons for three seconds. The unit will turn on automatically
and display the
RESET
message in the
Main Information Display
.
AVR120
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 120’s entire
system, first put the unit in Standby by pressing the
System Power
Control
button. Next, press and hold the
Tone Mode
and the
FM Mode
Selector
buttons for three seconds. The unit will turn on automatically
and display the
RESET
message in the Main Information Display
AVR125
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system “reset” may clear the problem. To clear the AVR 125’s entire
system, first put the unit in Standby by pressing
the System Power
Control Button
. Next, press and hold the
Tone Mode
button for
three seconds. The unit will turn on automatically and display the
RESET
message in the Main Information Display
AVR130
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system “reset” may clear the problem. To clear the AVR 130’s entire
system memory , first put the unit in
Standby by pressing the
Standby/On Switch
so that the Power Indicator turns amber. Next,
press and hold the
Tone Mode
Button for three seconds. The unit will
reset and then turn on automatically.
AVR210
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 210’s entire
system, first put the unit in Standby by pressing the
System Power
Control
button. Next, press and hold the
Tone Mode
and the
FM Mode
Selector
buttons for three seconds. The unit will turn on automatically
and display the
RESET
message in the Main Information Display
AVR220
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 220’s entire
system, first put the unit in Standby by pressing the
System Power
Control
button. Next, press and hold the
Tone Mode
and the
FM Mode
Selector
buttons for three seconds. The unit will turn on automatically
and display the
RESET
message in the Main Information Display
AVR225
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system “reset” may clear the problem. To clear the AVR 225’s entire
system, first put the unit in Standby by pressing
the System Power
Control Button
. Next, press and hold the
Tone Mode
button for
three seconds. The unit will turn on automatically and display the
RESET
message in the Main Information Display
