Harman Kardon AVR 160/230, Руководство по обслуживанию

Страница: 4 / 116

9
ENGLISH
Component
Video
Monitor
Output
Component
1& 2
Inputs
HDMI
Monitor
Output
HDMI 1-3
Inputs
6-/8-Channel
Analog Audio
Inputs
Coaxial 1 & 2
Digital Audio
Inputs
Video 2 Audio/
Video Inputs
DVD Audio/
Video Inputs
Video
Monitor
Output
Video 1 Audio/
Video Inputs
& Outputs AC Power Cord
Subwoofer
Output
Front Speaker
Outputs
Surround Back
Speaker
Outputs
Surround
Speaker
Outputs
Optical 1&2
Digital Audio
Inputs
Tape Audio
Inputs & Outputs
Center
Speaker
Outputs
Coaxial
Digital Audio
Output
Main
Power Switch
FM Antenna
AM Antenna
AUX Input
CD Inputs
AM and FM Antenna Terminals : Connect the included AM and FM
antennas to their respective terminals for radio reception.
Component Video Monitor Output : If you are using one of the
Component Video Inputs and your television or video display is component-
video-capable, connect these jacks to the video display.
NOTE
: Due to copy-protection restrictions, there is no output at the
Component Video Monitor Outputs for copy-protected sources.
Component Video 1&2 Inputs : If a video source has analog
component video (Y/Pb/Pr) capability, and if you are not using an HDMI
connection, connect the component video outputs of the source to one of the
sets of component video inputs. Do not make any other video connections to
that source.
NOTE : AVR 160 does not transcode composite video source signals to the
component video format.
Video Monitor Output : If any of your sources use composite video
connections, connect this monitor output to the corresponding input on
your video display. Composite video source signals are only available at this
output.
Video 1, Video 2 and DVD Audio/Video Inputs : These jacks may
be used to connect your video-capable source components (e.g., Blu-ray
Disc™ player, DVD player, cable TV box) to the receiver.
NOTE : If a source is equipped with an HDMI output, it is preferable to
connect it to one of the AVR’s HDMI Inputs. If the source does not have an
HDMI output, use its component or composite video output, and make a
separate audio connection.
Video 1 Audio/Video Outputs : These jacks may be used to connect
your DVR, VCR or another recorder.
HDMI Inputs and Output : HDMI (High-Definition Multimedia Interface)
is a connection for transmitting digital audio and video signals between
devices. Connect up to three HDMI-equipped source devices to the HDMI
inputs using a single-cable connection.
When you connect the HDMI Output to your video display, the AVR 160 will
automatically transcode component video source signals to the HDMI format,
but they will be passed through at the original resolution and will not be
scaled. The AVR’s on-screen menus are visible when the HDMI Output is used,
but only at 576i resolution. The main video source will not be visible.
NOTES : When connecting a DVI-equipped display to one of the HDMI
Outputs:
Use an HDMI-to-DVI adapter.
•
Make sure the display is HDCP-compliant. If it isn’t, do not connect it to •
an HDMI Output; use an analog video connection instead.
Always make a separate audio connection.
•
REAR-PANEL CONNECTIONS
harman/kardon AVR 160/230 Service Manual
4 of 116