Harman Kardon AVR 145 Скачать руководство пользователя страница 38

Страница: 38 / 50

SYSTEM SETUP

System Setup

Full-OSD Time Out Adjustment

The

FULL OSD

menu system is used to

simplify the setup and adjustment of the AVR
using a series of on-screen menus. The factory
default setting for these menus leaves them on
the screen for 20 seconds after a period of inac-
tivity before they disappear from the screen or
Time Out. This Time Out is a safety measure to
prevent the menu text from burning into the
CRTs in your monitor or projector, which might
happen if they were left on indefinitely. However,
some viewers may prefer a slightly longer or
shorter period before the Time Out display.

To change the Full-OSD Time Out, you will need
to make an adjustment in the

SYSTEM

SETUP

menu (Figure 13). To start the adjust-

ment, press the

OSD

button

to bring the

MASTER MENU

to the screen. Press the

⁄

button

, until the on-screen

➞

cursor is next

to the

SYSTEM SETUP

line. Press the

Set

Button

to enter the

SYSTEM SETUP

menu (Figure 13).

At the

SYSTEM SETUP

menu make certain

that the on-screen

➞

cursor is next to the

FULL OSD TIME OUT

line by pressing the

⁄

Buttons

as needed. Next, press the

‹

›

buttons

until the desired time is

displayed in seconds. Note that unlike most of
the other options in this menu, this is a perma-
nent setting change, and the time-out entry will
remain in effect until it is changed, even when
the unit is turned off.

If you wish to make other adjustments in the
menu, press the

⁄

Buttons

until the

on-screen

➞

cursor is next to the desired setting

or the

BACK T O MASTER MENU

line and

press the

Set

button

. If you have no other

adjustments to make, press the

OSD

Button

to exit the menu system.

Default Surround Mode

In normal operation, when the AVR senses a
Dolby Digital or DTS digital audio data stream, it
will automatically switch the appropriate default
surround mode, with the AVR responding to the
data flags that are encoded on the DVD disc or
in the digital video broadcast. In most cases, this
is the correct mode, but you may have a particu-
lar preference for the mode you wish to hear
when Dolby Digital or DTS is present. The AVR
allows you to set the unit so that it will either
respond to the default or switch to your desired
mode.

If you wish to leave the default so that the mode
choice encoded in the disc is always used, no
further action is needed. Simply leave the setting
at the factory default of ON.

To set the unit so that it responds to the last sur-
round mode used when a Dolby Digital or DTS
source is playing, press the

⁄

Buttons

so that the

➞

cursor is pointing to the

DEFAULT SURR MODE

line. Press the

‹

›

Buttons

so that

OFF

appears, and the

setting will change. The unit will now use the last
mode, not the disc’s default for the two digitally
encoded data streams.

This setting does not apply to standard PCM dig-
ital inputs or to analog sources. In those cases,
the unit will always apply the surround or pro-
cessing mode that was last used for that input.

If you wish to make other adjustments, press the

⁄

Buttons

until the on-screen

➞

cursor

is next to the desired setting or the

RETURN

T O MASTER MENU

line and press the

Set

Button

. If you have no other adjustments to

make, press the

OSD Button

to exit the

menu system.

Full-OSD Background Color

When the full-OSD menu system is in use, the
default display appears with a solid blue back-
ground with white characters. If you wish, you
may select a solid black background as the
default. This setting may be changed by pressing
the

OSD Button

to display the

MASTER

. Use the

⁄

Buttons

to scroll

down to the

SYSTEM SETUP

line, and press

the

Set Button