Harman Kardon AVR 135 Скачать руководство пользователя страница 19

Страница: 19 / 115

OPERATION

OPERATION 27

Within five seconds of seeing the

DIRECT IN

scroll in the

Upper Display Line

, enter the

station frequency by pressing the

Numeric Keys

. If you press an incorrect button while entering

a direct frequency, press the

Clear Button

start over.

NOTE:

When the FM reception of a station is weak,

audio quality will be increased by switching to Mono
mode by pressing the

Tuner Mode Button

so that

MANUAL

appears momentarily in the

Lower Display Line

goes out. This will also

activate manual tuning mode.

Preset Tuning

Using the remote, up to 30 stations may be stored in
the AVR 135’s memory for easy recall using the front
panel controls or the remote.

To enter a station into the memory, first tune the
station using the steps outlined above. Then:

1. Press the

Memory Button

on the remote.

Two underscore lines will appear at the far right
side of the

Upper Display Line

2. Within five seconds, press the

Numeric Keys

corresponding to the location where you wish to
store this station’s frequency. Once entered, the
preset number will appear in the

Upper Display

Line

3. Repeat the process after tuning any additional

stations to be preset.

Recalling Preset Stations

• To manually select a station previously entered in

the preset memory, press the

Numeric Keys

that correspond to the desired station’s memory
location.

• To manually tune through the list of stored preset

stations one by one, press the

Preset Stations

Selector Buttons

on the front panel or

remote.

Recording

In normal operation, the audio or video source
selected for listening through the AVR 135 is sent to
the record outputs. This means that any program you
are watching or listening to may be recorded simply
by placing machines connected to the

Tape Outputs

Video 1 Audio/Video

and

S-Video Outputs

in the Record mode.

When a digital audio recorder is connected to the

Digital Audio Outputs

ﬂ‡

, you are able to record

the digital signal using a CD-R, MiniDisc or other digital
recording system.

NOTES:

• The digital outputs are active only when a digital sig-

nal is present, and they do not convert an analog
input to a digital signal, or change the format of the
digital signal. In addition, the digital recorder must
be compatible with the output signal. For example,
the PCM digital input from a CD player may be
recorded on a CD-R or MiniDisc, but Dolby Digital or
DTS signals may not.

• Please make certain that you are aware of any

copyright restrictions on any material you copy.
Unauthorized duplication of copyrighted materials is
prohibited by federal law.

Output Level Trim Adjustment

Normal output level adjustment for the AVR 135 is
established using the test tone, as outlined on pages
20–21. In some cases, however, it may be desirable
to adjust the output levels using program material such
as a test disc, or a selection you are familiar with.
Additionally, the output level for the subwoofer can
only be adjusted using this procedure.

To adjust the output levels using program material, first
set the reference volume for the front left and front right
channels using the

Volume Control

If you are using a disc with test signals or an external
signal generator as the source from which to trim the
output levels, you may use a handheld SPL meter to
guide you to the correct SPL levels. Set the meter to
the C-Weighting Slow scale, and adjust the volume
until the meter reads 75dB.

Once the reference level has been set, press the

Channel Select Button

and

FRONT L

LEVEL

will appear in the

Lower Display Line

. To change the level, first press the

Set Button

, and then use the

⁄

Buttons

to raise

or lower the level. DO NOT use the volume control,
as this will alter the reference setting.

Once the change has been made, press the

Set

Button

and then press the

⁄

Buttons

to select the next output channel location that you
wish to adjust. To adjust the subwoofer level, press
the

⁄

Buttons

until

WOOFER LEVEL

appears in the

Lower Display Line

Repeat the procedure as needed until all channels
requiring adjustment have been set. When all adjust-
ments have been made and no further adjustments
are made for five seconds, the AVR 135 will return to
normal operation.

The channel output for any input may also be adjusted
using the full-OSD on-screen menu system. First, set
the volume to a comfortable listening level using the

Volume Control

. Then, press the

OSD

Button

to bring up the

MASTER MENU

(Figure 1). Press the

Button

until the on-

screen

›

cursor is next to the

CHANNEL

ADJUST

line. Press the

Set Button

activate the

CHANNEL ADJUST

menu.

Once the menu appears on your video screen, first
use the

⁄

Buttons

to move the on-screen

›

cursor so that it is next to the

TEST TONE

line. Press the

‹

›

Buttons

so that

OFF

appears. This will turn off the test tone and allow you
to use your external test disc or other source material
as the reference. Then, use the

⁄

Buttons

to select the channels to be adjusted. At each channel
position, use the

‹

›

Buttons

to change the out-

put level. Remember, the goal is to have the output
level at each channel be equal when heard at the lis-
tening position. Regardless of the method used to
adjust the output levels, whether the test tone or an
external source is used, remember that when the AVR
is configured for 6.1 operation with only a single sur-
round back speaker, you will still have an output
adjustment for both a surround back left and surround
back right speaker location even though there is only
one speaker. This is not a duplicate adjustment.
Rather, it is needed so that the proper balance is
achieved for 7.1-channel processing modes when
the discrete surround back channels are mixed to a
single output.

If you wish to reset all the levels to their original
factory default of 0dB offset, press the

⁄

Buttons

so that the on-screen cursor is next to the

CHANNEL RESET

line and press the

‹

›

Buttons

so that the word

appears. After the

levels are reset, resume the procedure outlined above
to reset the levels to the desired settings. When all
adjustments are done, press the

⁄

Buttons

to move the on-screen

›

cursor so that it is next to

BACK TO MASTER MENU

and then press

the

Set Button

if you wish to go back to the

main menu to make other adjustments. If you have no
other adjustments to make, press the

OSD Button

to exit the menu system.

NOTE:

The output levels may be separately trimmed for

each digital and analog surround mode. If you wish to
have different trim levels for a specific mode, select that
mode and then follow the instructions in the steps shown
earlier.

Memory Backup

This product is equipped with a memory backup sys-
tem that preserves the system configuration information
and tuner presets if the unit is accidentally unplugged
or subjected to a power outage. This memory will last
for approximately four weeks, after which time all infor-
mation must be reentered.

AVR135

harman/kardon