Harman Kardon AVR 132 Скачать руководство пользователя страница 21

Страница: 21 / 36

ENGLISH

OPERATION

Operation

Basic Operation

Once you have completed the setup and configu-
ration of the AVR, it is simple to operate and
enjoy. The following instructions should be fol-
lowed for you to maximize your enjoyment of
your new receiver:

Turning the AVR On or Off

• When using the AVR for the first time, you must
press the

Main Power Switch

on the front

panel to turn the unit on. This places the unit in a
Standby mode, as indicated by the orange color of
the

Power Indicator

. Once the unit is in

Standby, you may begin a listening session by
pressing the

System Power Control

or the

Source

button

on the front panel or the

AVR

Selector

. Note that the

Power Indicator

will turn blue. This will turn the unit on and

return it to the input source that was last used.
The unit may also be turned on from Standby by
pressing any of the

Source Selector

buttons on

the remote

456

NOTE:

After pressing one of the

Input Selector

buttons

to turn the unit on, press the

AVR

Selector

to have the remote control the AVR

functions.

To turn the unit off at the end of a listening ses-
sion, simply press the

System Power Control

on the front panel or the

Power Off

Button

on the remote.

When the remote is used to turn the unit “off” it
is actually placing the system in a Standby mode,
as indicated by the orange color of the

Power

Indicator

When you will be away from home for an
extended period of time it is always a good idea
to completely turn the unit off with the front
panel

Main Power Switch

NOTE:

All preset memories may be lost if the

unit is left turned off with the

Main Power

Switch

for more than two weeks.

Using the Sleep Timer

• To program the AVR for automatic turn-off,
press the

Sleep Button

on the remote. Each

press of the button will increase the time before
shut down in the following sequence:

When the programmed sleep time has elapsed,
the unit will automatically turn off (to Standby
mode). Note that the front panel display will dim
to one half brightness when the Sleep function
is programmed. To cancel the Sleep function,
press and hold the

Sleep Button

until the

information display returns to normal brightness
and the

SLEEP OFF

message appears in the

Main Information Display

Source Selection

• To select a source, press any of the

Source Selector

buttons on the remote

456

NOTE:

After pressing one of the

Input Selector

buttons

you must press the

AVR Selector

to have the remote control the AVR functions.

• The input source may also be changed by
pressing the front-panel

Input Source

Selector

button

. Each press of the button

will move the input selection through the list of
available inputs.

• As the input is changed, the AVR will automat-
ically switch to the digital input (if selected), sur-
round mode and speaker configuration that
were entered during the configuration process
for that source.

• The front-panel

Video 3 Inputs

Optical

Digital 3 Input

or the

Coaxial Digital 3

Input

may be used to connect a device such

as a video game or camcorder to your home
entertainment system on a temporary basis.

• As the input source is changed, the new input
name will appear in the

Main Information

Display

and a green LED will light next to

the selected input’s name in the front-panel

Input Indicators

• When a pure audio input (CD, Tuner, Tape,
6/8 Channel Input) is selected, the last video
input used remains routed to the

Video Out-

puts

and

Video Monitor Output

This permits simultaneous viewing and listening
to different sources.

• When a Video source is selected, its audio
signal will be fed to the speakers and the video
signal for that input will be routed to the appro-
priate

Monitor Output Jack

and will be

viewable on a TV monitor connected to the AVR. If
a component video source is connected to the

Video 1

Video 2

Component

Inputs

, it will be routed to the

Component

Video Outputs

. Make certain that your TV is

set to the proper input to view the appropriate
video signal (composite, S-Video or component
video, see Notes for S-Video on page 13).

Controls and Use of Headphones

• Adjust the volume to a comfortable level using
the front panel

Volume Control

or remote

Volume Up/Down

buttons.

• To temporarily silence all speaker outputs
press the

Mute

button

. This will interrupt

the output to all speakers and the headphone
jack, but it will not affect any recording or
dubbing that may be in progress. Press the

Mute

button

again to return to normal

operation.

• During a listening session you may wish to
adjust the

Bass Control

and

Treble Control

to suit your listening tastes or room acoustics.

• To set the output of the AVR so that the out-
put is “flat,” with the Tone controls and the
Balance control de-activated, press the

Tone

Mode

button

button once or twice so that

the words

Tone Out

appear momentarily in

the

Main Information Display

. To return

the tone controls to an active condition, press
the

Tone Mode

button once or twice so

that the words

Tone I n

momentarily appear

in the

Main Information Display

• To change the Bass or Treble Control settings
press the

Tone Mode Button

until the

words Bass or Treble appear momentarily in the

Main Information Display

. Press the

Set

Button

followed by the

Buttons

to adjust the setting. When done, press

the

Tone Mode Button

again to exit the

Tone Mode Menu.

• For private listening, plug the 6.3 mm stereo
phone plug from a pair of stereo headphones
into the front panel

Headphone Jack

. Note

that when the headphone’s plug is connected,
the word

HEADPHONE

will scroll once

across the

Main Information Display

and

all speakers will be silenced. When the
headphone plug is removed, the audio feed to
the speakers will be restored.

• When the headphones are in use, you may
take advantage of the Dolby Headphone modes
to bring added spaciousness to headphone
listening. Press the

Dolby Mode Select

Button

or the

Surround Mode Group

Selector

to cycle through the three Dolby

Headphone modes to select the one that you
prefer.

Surround Mode Selection

One of the most important features of the
AVR is its ability to reproduce a full multichannel
surround sound field from digital sources, analog
matrix surround encoded programs and standard
stereo or even mono programs. In all, a total of
fifteen listening modes are available on the AVR.

Selection of a surround mode is based on person-
al taste, as well as the type of program source
material being used. For example, motion pic-
tures, CD’s or TV programs bearing the logo of
one of the major surround encoding processes,
such as Dolby Surround should be played in either
the Dolby Pro Logic II Movie (with movies) or
Music (with music) surround mode or with the
Harman Kardon´s exclusive Logic 7 Movie Mode,
to create a full range discrete 5.1 channel sur-
round signal from surround encoded programs
with a stereophonic left and right rear signal,
just as it was recorded in real life (e.g. sound
being recorded from left rear side will be heard

min