Harken R32 Скачать руководство пользователя страница 27

 

Access Rail System – R32 

20 - Worldwide Limited Warranty

COVERAGE. HARKEN® warrants that each HARKEN product, when properly used and maintained, will be free from defects 

in material and workmanship from the date of receipt of the product by the final customer.

THE LIMITED WARRANTY. This limited warranty applies to all Harken products purchased. The sole and exclusive remedy 

under this LIMITED WARRANTY for original defects in materials or workmanship of a HARKEN product shall be the repair 

or replacement, at HARKEN’s sole discretion, of the defective part or component, in accordance with the terms of this 

warranty.

WARRANTOR. For products originally sold in the Unites States, the limited warranty for the products are supplied by 

HARKEN, INC.. For products originally sold in the European Union, the limited warranty for the products is supplied by the 

dealer who sold the product through the Harken Distributors in that country. For products originally sold in the rest of the 

World, the limited warranty for the products is supplied directly by the Harken Distributors in that country. When “HARKEN” 

is mentioned throughout this Limited Warranty, it refers to the entity as defined in this paragraph.

OWNER – NON-TRANSFERABLE WARRANTY. This warranty is made by HARKEN with the original purchaser of the product 

and does not extend to any third parties. The rights of the original purchaser under this warranty may not be assigned or 

otherwise transferred to any third party.

WARRANTY TERM. The LIMITED WARRANTY covers any original defects in material or workmanship manifested within 10 

years of the date of receipt of the product by the final customer for use in non-marine applications such as built 

environments. The same coverage for marine use and corrosive applications is limited to a 12 month term. 

NOT COVERED. The LIMITED WARRANTY does not apply to, nor shall HARKEN have any liability or responsibility for, 

damages or expenses relating to defects caused by misuse, abuse, failure to install, use, maintain or store the HARKEN 

product as specified in the warranty booklet, service booklet, manuals, catalogue or other literature available from HARKEN.

The LIMITED WARRANTY does not apply to, and neither shall HARKEN have any liability or responsibility in respect to, 

damages or expenses relating to:

• defects in material or workmanship that did not exist when the product was first delivered;

• defects in material or workmanship that are manifested outside the warranty period;

• defects which are not reported to HARKEN within sixty (60) days of discovery;

• a product that has been altered or modified from factory specifications;

• damage or deterioration of cosmetic surface finishes, including cracking, crazing, discoloration or fading;

• accidents, misuse, abuse, abnormal use, improper use, lack of reasonable or proper maintenance or storage;

• installation, service or repairs improperly performed or replacement parts or accessories not conforming to 

HARKEN’s specifications;

• use exceeding the recommended and permitted limits or loads of the product and/or the product on which the 

product is installed;

• normal wear or deterioration occasioned by the use of the product or its exposure to the elements;

• ropes, lines, buckles and webbing;

• loss of time, loss of use, inconvenience, travel expense, costs related to procuring any substitute product, 

transportation costs, any incidental or consequential damages arising out of the non-use of the product, or com-

pensation for inconvenience or loss of use while the product is being repaired or otherwise not available, or other 

matters not specifically covered hereunder;

• the costs to remove, disassemble or re-install the product;

• removal, storage and replacing of the product on which the product has been installed, even where this is neces-

sary to carry out  the warranty service.

The LIMITED WARRANTY does not cover, nor shall HARKEN have any liability or responsibility in respect of, damages or 

expenses relating to, the following products and/or components:

• washers and spacers;

• ball bearings, roller bearings, thrust bearings.

Online warranty registration. Registering this product online at www.harken.com is critical to receive product 

updates or any recall information. Harken will not sell this information or use it for solicitation.

Содержание R32

































Отзывы: