17
ENGLISH
05/15/2022
Lifting Load
1.
Feed the rope through the pigtail. Start at base and wind rope
onto drum in a clockwise direction.
2.
Ensure that the rope does not override (overlap) on winch.
WARNING!
NEVER ALLOW ROPE TO (OVERRIDE) OVERLAP ON
WINCH DRUM. THIS CAN CAUSE ROPE TO JAM AND
CAN PREVENT LOAD FROM BEING LIFTED/LOWERED.
TENSION ON ROPE TO LOAD MUST BE RELIEVED TO
CLEAR OVERRIDE (OVERLAP). THIS PROCEDURE
CARRIES A RISK OF SERIOUS INJURY OR DEATH IF
LOAD DROPS OR BECOMES UNCONTROLLABLE.
WARNING!
TAKE AT LEAST TWO TURNS OF THE ROPE AROUND
THE WINCH DRUM, AND IF IT SLIPS UNDER LOAD
INCREASE THE NUMBER OF TURNS TO A MAXIMUM OF
FOUR, TAKING CARE NOT TO OVERLAP THE ROPE.
WARNING!
KEEP FINGERS, LOOSE CLOTHING, HAIR ETC AWAY
FROM WINCH. AREA AROUND WINCH HANDLE
SHOULD BE KEPT CLEAR OF PEOPLE AND OBJECTS
AT ALL TIMES.
NOTE!
The number of turns needed round the winch
drum depends on the load and the condition of the
rope. Check the device's descending capacity in its
working configuration.
In case of difficulties unwind the rope, and reduce the
turns to not less than 2 wraps, until you have the
optimal configuration.
