Harken FlatWinder 250, Руководство по установке и обслуживанию

Страница: 5 / 27

5
FlatWinder
TM
250-500
Installation and Maintenance Manual
Introduction
This manual gives technical information on FlatWinder
TM
installation and maintenance,
including disassembling and reassembling.
This information is DESTINED EXCLUSIVELY for specialised personnel or expert users.
Installation, disassembling and reassembling of the FlatWinder
TM
by personnel who are not
experts may cause serious damage to users and those in the vicinity of the FlatWinder
TM
.
Harken
®
accepts no responsibility for defective installation or reassembly of its FlatWinder
TM
.
In case of doubt the Harken
®
Tech Service is at your disposal at techservice@harken.it
This Manual is available only in English. If you do not fully understand the English language,
do not carry out the operations described in this Manual.
Technical characteristics
Rope diameter Ø10
Performance data
FlatWinder
TM
250 FlatWinder
TM
500
Voltage 12V 24V 12V 24V
max load (kg) 250 250 500 500
Line speed (m/min)** 35 35 26 32
Current absorption at max load (A) 210 140 320 160
**Line speed is measured with no load
Weight
FW250E A FW500E A
weight (kg) 12.5 22.5
A = base and pulley anodised aluminum
Maximum working load
WARNING!
The maximum working load (MWL) for the FlatWinder
TM
250 is 250 Kg (551 lb) and
for the FlatWinder
TM
500 is 500 Kg (1102 lb)
Subjecting the FlatWinder
TM
to loads above the maximum working load can cause
the FlatWinder
TM
to fail or pull off the deck suddenly and unexpectedly during high
loads causing severe injury or death.