Harken FlatWinder 250, Руководство по установке и обслуживанию

Страница: 17 / 27

17
FlatWinder
TM
250-500
Installation and Maintenance Manual
WARNING!
Periodic maintenance must be carried out regularly. Lack of adequate maintenance
shortens the life of the FlatWinder
TM
, can cause serious injury and also invalidate the
FlatWinder
TM
warranty.
Installation and maintenance of FlatWinder
TM
must be carried out exclusively by
specialized personnel.
WARNING!
Make sure that the power is switched off before installing or carrying out
maintenance on the FlatWinder
TM
.
In the case of doubt contact Harken
®
Tech Service at techservice@harken.it
Disassembly procedure
Tools needed
A number four hex key
A number five hex key
Remove the central M8 screw
NOTICE
To remove the upper jaw can be used the two top holes M6 as an extractor:
Remove the two M6 countersunk screws, insert two M6x70 and tighten up the upper jaw rise.