manualshive.com logo in svg

Harken CLR 1200, Руководство по установке и обслуживанию

Поделиться
Скачать
Harken CLR 1200 Скачать руководство пользователя страница 5

5

CLR Mooring Winch

Installation and Maintenance Manual - Mod.A

1. Glossary

- Intended use: specific and proper use of the winch for which it is designed.
- Improper use: use of the winch in a different way from that indicated in the instructions for use 
specified in this manual.
- Qualified operator: person who has attended specialisation and training about the use of the winch.
- User: person who uses the winch regularly.
- Maximum working load (MWL): maximum value of the load the winch can bear in a dynamic 
working condition.
- Maximum holding load (MHL): maximum value of the load the winch can bear in a static working 
condition.

2. Symbols

WARNING!

This denotes the existence of a potential danger, which could cause injury or damage if the 
information or instructions are not followed.

DANGER!

This denotes the existence of a potential danger, which could cause serious injury or death if 
the instructions are not followed.

NOTE!

This denotes particularly important information concerning the device.

Содержание CLR 1200




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды